Polyester copolymer sheets
Moulding ideas
Safe and reliable sheets of great resistance and versatility
NUDEC PETG plastic sheets are easily processed as they can be molded into different pieces and shapes other polymers cannot. They are easily thermoformed, even in thick gauges (up to 15 mm).
This is one of the most valued properties within the transformation process of PETG plastic sheets. Unlike PC, PETG sheets do not require pre-drying and can be thermoformed in thicknesses greater than those of PMMA.Furthermore, they can be cold bent (up to 2 mm thickness) and can also be laser-cut.Plastic sheet properties
- Excellent transparency and surface brightness
- High impact strength and resistance to breakage
- Excellent chemical resistance
- Easily thermoformable
- Reduce noise transmission
- Good fire performance
- Reciclables
Applications
- Displays, signs, showcases and other publicity material at sales points (PLV)
- Industrial protection
- Molded pieces
- Vending and recreational machines design
- Orthopaedic parts and medical equipment components
- Riot shields
- Glazing
- Construction components
- Urban and interior furniture design
Applications
Downloads
Containing approximately 50 % of regrind material from our own PETG plastic sheets production.
NUDEC PETG Standard range | Polyethyleneterephthalate copolymer sheets
Measurements expressed in millimeters (and in inches) | ||||||
Pattern | Colour | Caract. | L. T. | Dimensions | Thickness | N. sheets |
Plain | Clear | – | – | 3.050 x 2.050 | 1,1 1,5 2 3 4 5 6 8 10 12 15 |
100 80 60 40 30 25 20 15 12 10 8 |
Plain | Clear | – | – | 2.050 x 1.250 | 0,5 0,7 1 1,5 2 3 |
300 250 200 150 120 80 |
Plain | Clear | – | – | 2.440 x 1.220 | 0,5 –.020 0,75-.030 1 – .040 1,5 –.060 2 – .080 2,5 – .100 3 – .120 4,5 5,6 6 |
400 260 200 130 105 85 72 48 38 36 |
Plain | Opal 529 | U.V. 2 faces | 38 % | 3.050 x 2.050 | 2 3 4 |
60 40 30 |
The stated light transmission (L. T.) corresponds with 3 mm thick sheets (except where stated otherwise). For details on other thicknesses, please refer to our R&D Department. Light transmission tolerance is ±5. |
NUDEC PETG Non-standard range | Polyethyleneterephthalate copolymer sheets
The products registered in the manufacture program enable to choose the thickness and colour of the sheets. It must be taken into account that the tonality and light transmission can be different from trials carried out with standard products. For further information you can address to your Sales Area Manager or to NUDEC Commercial Department. It must be consulted the manufacture viability of special formats as well as production minimums. The quantity of the sheets for special
sizes orders can range from 5% at the most.
Pattern | Colour | Caract. | T. L. | ||
Plain
|
Clear
|
U.V. 2 faces | – | ||
Ref. 141
|
Clear/Opaque
|
2 faces | – | ||
–
|
– | – |